Q01 | | | How to use LITEON LED Lamp in circuit design? |
(1) Circuit model A: One lamp connects one resistor. Brightness can be uniform.
(2) Circuit molde B: Two or more lamps connect one resistor. Brightness will be a little different due to I-V characteristics.
(2) Circuit molde B: Two or more lamps connect one resistor. Brightness will be a little different due to I-V characteristics.
Q02 | | | Can LITEON LED LAMP be passed with IR-reflow process? |
IR-reflow is for SMD type LED. Normal lamp LED is thro-hole type, so it can’t be passed with IR-reflow process.
Q03 | | | How many colors can Thru-Hole LED LAMPS of LITEON support? |
Color | Wavelength | Chip |
White | X: 0.31~0.41 Y: 0.32~0.39 | InGaN |
Blue | 460~475nm | InGaN |
Cyan | 500~510nm | InGaN |
Green | 520~535nm | InGaN |
Yellow Green | 565~575nm | AlGaInP / GaP / GaAsP |
Yellow | 584~594nm | AlGaInP / GaP / GaAsP |
Amber | 600~610nm | AlGaInP / GaP / GaAsP |
Orange | 610~620nm | AlGaInP / GaP / GaAsP |
Red | 620~660nm | AlGaInP / GaP / GaAsP / AlGaAs |
Q04 | | | Product Meet Rohs, Halogen Free, and Pb Free? |
The whole LITEON LED Product already pass Rohs, Pb-free and Rohs, and then we provide Halogen Free product to customers, too.
Q05 | | | What is the Luminous Flux?What is the Luminous Flux? |
Unit : lumen, Luminous Flux is a measure of the power of visible light. Photopic flux, express in lumens, is weighted to match the responsivity of human eyes.
Q06 | | | SMD LED Category? |
(1) PCB Substrate, call Chip LED.
(2) Lead - Frame Substrate, call PLCC.
(2) Lead - Frame Substrate, call PLCC.
Q07 | | | What is soldering condition of LED Lamp? |
Soldering iron and wave soldering is only one time.
Soldering iron | Wave soldering | ||
Temperature Soldering time | 300°C Max. 3 sec. Max. (one time only) | Pre-heat Pre-heat time Solder wave Soldering time | 100°C Max. 60 sec. Max. 260°C Max. 5 sec. Max. |
Q08 | | | How to select LED Lamp in LITEON Data sheet? |
In LITEON Data sheet, we will show IV, Hue, Vf, and view angle. Users can select the suitable spec. from LITEON’s LED lamp.
Q09 | | | How to check view angle in LED lamp? |
Circuit model A: One lamp connects one resistor. Brightness can be uniform.
(1) 3mm & 5mm lamps are normal lens, so view angle will be uniform in any direction.
(2) Oval lamp is ellipse lens, so view angle is different in X-Y axis.
(1) 3mm & 5mm lamps are normal lens, so view angle will be uniform in any direction.
(2) Oval lamp is ellipse lens, so view angle is different in X-Y axis.
Q10 | | | How much operation current is for LITEON LED lamp? |
Indicator lamp:
Lamp LED | Operation current | Chip |
White | 5~20mA | InGaN |
Blue | 5~20mA | InGaN |
Cyan | 5~20nm | InGaN |
Green | 5~20nm | InGaN |
Yellow Green | 2~20nm | GaP / GaAsP |
Yellow | 2~20nm | GaP / GaAsP |
Amber | 2~20nm | GaP / GaAsP |
Orange | 2~20nm | GaP / GaAsP |
Red | 2~20nm | AlGaInP / GaP / GaAsP / AlGaAs |
High brightness lamp
Lamp LED | Operation current | Chip |
White | 20~30mA | InGaN |
Blue | 20~30mA | InGaN |
Cyan | 20~30nm | InGaN |
Green | 20~30nm | InGaN |
Yellow Green | 20~30nm | AlGaInP |
Yellow | 20~50nm | AlGaInP |
Amber | 20~50nm | AlGaInP |
Orange | 20~50nm | AlGaInP |
Red | 20~50mA | AlGaInP |